641-792-8285 Contact Us

PN001(Kit) JMC Backsaver Handle

PN001(Kit) JMC Backsaver Handle

Share this Product

Details

Weight
6.00 lbs
Our price
US$419.64

Options

Quantity


Product Description

JMC Backsaver Handle with Special Cleaner

Don't risk serious injury to your back, hands, or wrists. Pull samples easily with our JMC Backsaver Handle. Fitted with an 18 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 46 inches. No bending over - handgrip stays at waist level throughout the sampling procedure.

  • All metal parts nickel-plated to protect against rust and wear.
  • Footpedal offers extra leverage for penetrating hard ground.
  • Compatible with all JMC Sampling Tubes listed below.
  • Rod Extensions may be added for more depth capability.
  • JMC Special Cleaner rapidly removes soil core and prepares tube for next sample.

Picture above shows JMC Backsaver Handle with an 18 inch Dry Sampling Tube. The JMC Special Cleaner is inside the leather pouch the technician is wearing. Both the Special Cleaner and the leather pouch are included with the JMC Backsaver Handle.

How the JMC Backsaver Handle Works

Simply step down on the footpedal to plant your sampling tube. Then, bend your knees, grab the handgrip (now near waist level), and straighten your legs to lift the sampler out of the ground. Remove your sample with the JMC Special Cleaner and you are ready to sample again.

Insert the tube into the same hole in the ground. Step lightly on the footpedal to release the sliding rod inside the handle. Let 8 to 12 inches of the rod slide out of the handle. Then step down hard on the footpedal to lock the rod and drive the sampling tube further into the ground. When the tube is full (You can track depth by looking at the holes in the side of the Backsaver Handle), grab the handgrips and straighten your legs to lift the tube from the ground as you did before. When the handgrip gets too high, step lightly on the foot pedal and slide some of the rod back into the handle. Continue lifting the handgrips and adjusting the handle’s height as needed until the tube comes out of the ground. After cleaning the tube, either reenter the same hole for a deeper sample or move to a new site.

Reminder: Sampling Tubes are sold Separately!
        (You will choose your sampling tubes in the next step.)

Our JMC Backsaver Handle fits a variety of soil sampling tubes. Each tube features a self-sharpening tip that pulls consistently good cores and outlasts common replaceable tips eight to one.

We have 6 kinds of tubes for the JMC Backsaver Handle:
        (Click Here for a more complete summary.)

Wet Sampling Tubes.
Work best in soft, moist soils. Core diameter is 0.688 inches.
Dry Sampling Tubes.
Work best in hard, dry soils. Core diameter is 0.75 inches.
(If you just want one tube, get one of these,)
Ag Consultant's Sampling Tube.
Same design as the Dry Tubes, but produces a core diameter of only 0.56 inches.
Large Diameter Sampling Tube.
Same design as the Dry Tubes, but produces a core diameter of 1.2 inches.
Zero Contamination Tube.
Gathers samples uncontaminated by surface debris encased in clear, replaceable, plastic liners. Samples measure 1.2 inches in diameter.
Concentric Sampling Tube
Gathers samples in plastic liners like the Zero Contamination Tube, but the samples measure 2 inches in diameter and 6 inches long. Also features a metal casing which can be left in the ground for later retrieval.
  • Recommended

  • Reviews

  • Send

  • PN157 JMC ESP Master Extension

    This extension lets you sample 3 feet deeper than the length of your sampling tube. (6 feet with a 3 foot tube) If you want to sample deeper than that you will need to purchase one or more JMC ESP Regular Extensions in addition to this extension.
    US$278.74
  • PN014 JMC 12 inch Zero Contamination Sampling Tube

    This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 12 inches long by 0.8 inches in diameter.
    US$265.02
  • PN057 JMC 18 inch Zero Contamination Sampling Tube

    This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 18 inches long by 0.8 inches in diameter.
    US$343.92
  • PN060 JMC Quick-Connect Auger Handgrip

    Compatible with all JMC Quick Connect Augers and Extensions. Should NOT be struck with a mallet.
    US$92.37
  • PN112(QCAugKit) Deluxe Case for 34 inch Extensions

    Fits all augers, 34 inch extensions, sampling tubes, and auger handgrips.
    US$360.31
  • PN130 JMC Ag Consultant's Special Cleaner

    • Cleans JMC Ag Consultant's Sampling Tubes quickly and thoroughly.
    • Minimizes effort needed to extract samples.
    • Lubricates tube for easier sampling and corrosion resistance.
    • Keeps hands clean and uninjured.
    US$66.29
  • PN055(SoilFert) JMC Conventional Handle with Sampling Tube

    The JMC Conventional Handle with Sampling Tube gathers samples down to 18 inches.

    US$162.69
  • PN034 JMC Screw Auger

    For penetrating difficult ground conditions where a standard sampling tube fails to penetrate.

    US$219.22
  • PN457 ESP PLUS to Sampling Tube (½ inch Thread) Adapter

    Adapter allows the JMC Environmentalist's Sub-Soil Probe PLUS to use any JMC Sampling Tube.
    US$149.36

Product Rating

Sign in to rate

Customer Reviews

I have been using a backsaver soil probe for 15 years and still have my original one. It is the best there is, from the handy ratcheting design, to the great cutting tip. There are a lot of other soil probes out there, but this one works the best.

Danyal Kasapligil

Login to post a review

Send to Friend

: *
: *
: *