641-792-8285 Contact Us

PN001(SBD) JMC Backsaver Handle with Special Cleaner and Zero Contamination Tube

PN001(SBD) JMC Backsaver Handle with Special Cleaner and Zero Contamination Tube

Share this Product

Details

Weight
9.75 lbs
Our price
US$407.42

Options

Zero Contamination Tube Desired:
Quantity

Product Description

JMC Backsaver Handle with Special Cleaner and JMC Zero Contamination Tube

Don't risk serious injury to your back, hands, or wrists. Pull samples easily with our JMC Backsaver Handle. Fitted with an 18 inch JMC Zero Contamination Tube, this handle allows you to gather undisturbed soil samples encased in removeable PETG Copyester liners down to 46 inches. No bending over - handgrip stays at waist level throughout the sampling procedure.

Simply step down on the footpedal to plant your sampling tube. Then, grab the hand grip (now near waist level) and use your legs to lift the sampler out of the ground. Clean your tube quickly by first removing the plastic liner containing your sample. Then unplug the end of the tube with the JMC Special Cleaner held in a leather pouch on your belt. Finally, insert a clean liner into the sampling tube and you are ready to go again.

Insert the tube into the same hole in the ground. Step lightly on the footpedal to release the sliding rod inside the handle. Let 8 to 12 inches of the rod slide out of the handle. Then step down hard on the footpedal to lock the rod and drive the sampling tube further into the ground. When the tube is full (You can track depth by looking at the holes in the side of the Backsaver), pull the tube from the ground as you did before. When the hand grip gets too high for comfort, step lightly on the foot pedal and slide some of the rod back into the handle.

  • Tube isolates sample from surrounding soil while being lifted out of the ground.
  • Vinyl caps seal sample inside liner during transit to your lab.
  • Samples measure 0.8 inches in diameter.
  • Tubes available in 12 or 18 inch lengths.
  • Foot pedal offers extra leverage for penetrating hard ground.
  • Strong, lightweight, nickel-plated steel tubing resists rust and wear.
  • Extra liners available. (See related product list below.)
  • Stainless Steel liners also available. (See related product list below.)
  • Handle samples to 8 feet with JMC Rod Extensions.
         (See related product list below.)
    Included in this package are:
  • 1 – JMC Backsaver Handle with Special Cleaner
  • 1 – JMC Zero Contamination Sampling Tube
  • 15 – PETG Copolyester Liners
  • 15 – Black vinyl caps
  • 15 – Red vinyl caps
  • 1 – Pull pin (quickest method for unloading samples)
  • 1 – Straight pin (for sampling deeper than length of tube with extensions)
Photo: JMC Zero Contamination Tube and Liner

Several different sampling tubes will fit this handle. click here for a pop-up summary or click the links in the related products list below.

  • Related

  • Recommended

  • Reviews

  • Send

  • PN047 Set of 15, PETG 12 inch Liners w/ Caps

    Replacement liners for JMC 12 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$29.65
  • PN056 12 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 12" long. Although made for the JMC 12" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe and the JMC 18 inch Zero Contamination Tube when used with Spacers.

    US$23.11
  • PN058 Set of 15, PETG 18 inch Liners w/ Caps

    Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$42.55
  • PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 18" long. Although made for the JMC 18" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe when used with Spacers.

    US$31.26
  • PN006 JMC 12 inch Wet Sampling Tube

    Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.
    US$79.89
  • PN007 JMC 12 inch Dry Sampling Tube

    Works well in hard, dry soils. Sample core measures 9 inches long by 0.75 inches diameter.
    US$79.89
  • PN008 JMC 15 inch Wet Sampling Tube

    Work best in soft, moist soils. Sample core measures 12 inches long by 0.688 inches diameter.
    US$82.42
  • PN009 JMC 15 inch Dry Sampling Tube

    Works well in hard, dry soils. Sample core measures 12 inches long by 0.75 inches diameter.
    US$82.42
  • PN010 JMC 18 inch Wet Sampling Tube

    Work best in soft, moist soils. Sample core measures 15 inches long by 0.688 inches diameter.
    US$85.20
  • PN011 JMC 18 inch Dry Sampling Tube

    Works well in hard, dry soils. Sample core measures 15 inches long by 0.75 inches diameter.
    US$85.20
  • PN029 JMC 12 inch Ag Consultant's Sampling Tube

    A smaller diameter version of our regular sampling tube. Sample core measures 9 inches long by 0.56 inches diameter.
    US$90.25
  • PN030 JMC 18 inch Ag Consultant's Sampling Tube

    A smaller diameter version of our regular sampling tube. Sample core measures 15 inches long by 0.56 inches diameter.
    US$102.56
  • PN012 JMC 12 inch Large Diameter Sampling Tube

    Sample core measures 9 inches long by 1.25 inches diameter - almost 3 times the volume of our 12 inch Dry Sampling Tube!
    US$181.32
  • PN013 JMC 18 inch Large Diameter Sampling Tube

    Sample core measures 15 inches long by 1.25 inches diameter - almost 3 times the volume of our 18 inch Dry Sampling Tube!
    US$191.24
  • PN400 JMC 2 by 6 inch Concentric Sampling Tube

    Developed for soil dissipation studies, but can be used like any of our sampling tubes. Sampling tube fills a plastic liner 2 inches in diameter by 6 inches long. Best for shallow sampling applications, this tube fits most of our JMC sampling devices, but may require an adapter.

    US$682.27
  • PN005 JMC 13 inch Rod Extension

    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.
    US$51.28
  • PN004 JMC 26 inch Rod Extension

    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.
    US$55.26
  • PN230 JMC Pin Ejection Tool

    Removes crosspins quickly and easily from extensions for the JMC Environmentalist's Sub-Soil Probe and JMC Environmentalist's Sub-Soil Plus.
    US$106.61
  • PN002 JMC Backsaver N-3 Handle with Special Cleaner

    • Samples to 66 inches with an 18 inch JMC Sampling Tube.
    • No bending over.
    • Sampling tubes sold separately.
    US$469.88
  • PN006 JMC 12 inch Wet Sampling Tube

    Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.
    US$79.89
  • PN112(BSHKit) Deluxe Case for Backsaver with wrench

    Fits all rod extensions, sampling tubes, and handles except JMC Backsaver N-3 Handle.
    US$376.79
  • PN061 JMC Quick-Connect Driveable Auger Handgrip

    Compatible with all JMC Quick Connect Augers and Extensions. Can be struck with a mallet.
    US$125.30
  • PN067 JMC 3 inch Quick Connect Professional Mud Auger

    Good for mud and heavily saturated clay soils. Fits all JMC Quick Connect Professional Auger components.
    US$203.74
  • PN137 JMC 4 Foot Tile Probe

    For determining the location of buried tile drains, pipes, storage drums, rocks and clay barriers

    • Easy ground penetration and retraction
    • Nickle-plated steel construction
    • No moving parts
    US$47.62
  • PN235- 36 inch spacer for ESP Tubes

    This reusable spacer allows you to fit an 12 inch liner into a 48 inch ESP Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

    US$41.99
  • PN043 Footpedal for JMC Backsaver Handles

    Replacement footpedal for JMC Backsaver and Backsaver N-3 Handles.
    (Will NOT fit the JMC Backsaver N-2 Handle.)

    US$65.30

Product Rating

Sign in to rate

Customer Reviews

I have been using a backsaver soil probe for 15 years and still have my original one. It is the best there is, from the handy ratcheting design, to the great cutting tip. There are a lot of other soil probes out there, but this one works the best.

Danyal Kasapligil

Login to post a review

Send to Friend

: *
: *
: *