• Replaces the ESP's manual sliding drop hammer.
• Substantially reduces operator fatigue when sampling hard packed clay or frozen soils.
• Drills through concrete (requires carbide bit PN216). Perfect for gaining access to samples under concrete pads!
• Runs on standard AC voltage from a power outlet of 1800 watt generator.
• Slips easily onto sampling tubes or extensions (with proprietary adapter).

Hammer Features

• SDS-max® bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
• Dual mode selector 2 modes of operation, rotary hammer and hammer only mode
• Variable-speed dial for accurate bit starting and controlled chipping applications
• Constant Response^TM Circuitry Provides soft-start, maintains constant speed under load, provides overload protection
• Service Minder^TM light indicates when preventative maintenance is required
• Vario-Lock ^TM positioning rotates and locks chisel into 12 different positions to optimize working angle
• Padded rear handle absorbs shock for operator comfort
• Integral clutch helps minimize torque reaction
• 360° Auxiliary handle provides a wide range of movement along with operator comfort
• Double insulated, UL listed, complies to OSHA
• Includes:Auxiliary Handle & Carrying Case

Hammer Specifications:

• Amperage: 15.0 Amps
• Impact Energy (ft. lbs.): 14.1 ft. lbs.
• No Load RPM: 100-220
• No Load BPM:1,000-2,150
• Max. Hole Diameter in Concrete: 2 inches
• Max. Hole Diameter in Concrete-Core Bit: 6 inches
• Max. Hole Diameter in Concrete-Thru Hole Bit: 3-1/8inches
• Max. Hole Diameter in Steel-Twist Drill Bit: 2 inches
• Max. Hole Dia. - Core Bit: 6 inches
• Length: 23.5 inches
• Rating: 120 volts
• Weight without bit: 26.2 lbs.