641-792-8285 Contact Us

PN215 Bosch 11245 Rotary Hammer & Case w/Adapter for ESP

PN215 Bosch 11245 Rotary Hammer & Case w/Adapter for ESP

Share this Product

Details

Weight
51.00 lbs
Our price
US$1587.35

Options

Carbide Bit
Quantity

Product Description

PN215 Bosch 11245 Rotary Hammer & Case w/Adapter for ESP

  • Replaces the ESP's manual sliding drop hammer.
  • Substantially reduces operator fatigue when sampling hard packed clay or frozen soils.
  • Drills through concrete (requires carbide bit option). Perfect for gaining access to samples under concrete pads!
  • Runs on standard AC voltage from a power outlet of 1600 watt generator.
  • Slips easily onto sampling tubes or extensions with the included proprietary adapter.
Bosch 11245 Rotary Hammer with Adapter.

Hammer Features

  • SDS-max® bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
  • Dual mode selector 2 modes of operation, rotary hammer and hammer only mode
  • Variable-speed dial for accurate bit starting and controlled chipping applications
  • Constant ResponseTM Circuitry Provides soft-start, maintains constant speed under load, provides overload protection
  • Service MinderTM light indicates when preventative maintenance is required
  • Vario-Lock TM positioning rotates and locks chisel into 12 different positions to optimize working angle
  • Padded rear handle absorbs shock for operator comfort
  • Integral clutch helps minimize torque reaction
  • 360° Auxiliary handle provides a wide range of movement along with operator comfort
  • Double insulated, UL listed, complies to OSHA
  • Includes:Auxiliary Handle & Carrying Case

Hammer Specifications:

  • Amperage: 14.0 Amps
  • Impact Energy (ft. lbs.): 13.3 ft. lbs.
  • No Load RPM: 120-250
  • No Load BPM:1,100-2,500
  • Optimal Concrete Capacity Range:3/4 to 1-3/4 inches
  • Max. Hole Diameter in Concrete: 2 inches
  • Max. Hole Diameter in Concrete-Core Bit: 6 inches
  • Max. Hole Diameter in Concrete-Thru Hole Bit: 3-1/8inches
  • Max. Hole Diameter in Steel-Twist Drill Bit: 2 inches
  • Max. Hole Dia. - Core Bit: 6 inches
  • Length: 23.5 inches
  • Rating: 120 volts
  • Related

  • Recommended

  • Reviews

  • Send

  • PN150 JMC Environmentalist's Sub-Soil Probe

    The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.
    US$2646.35
  • PN013 JMC 18 inch Large Diameter Sampling Tube

    Sample core measures 15 inches long by 1.25 inches diameter - almost 3 times the volume of our 18 inch Dry Sampling Tube!
    US$191.24
  • PN112(BSHKit) Deluxe Case for Backsaver with wrench

    Fits all rod extensions, sampling tubes, and handles except JMC Backsaver N-3 Handle.
    US$376.79
  • PN431 Set of 15, PETG 48 inch Liners w/ Caps

    Replacement liner for PN425a JMC Environmentalist's Sub-Soil Probe Plus' 48 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.
    US$77.65
  • PN094 JMC Featherweight Auger Kit

    Less expensive than our JMC Professional Augers, but sufficiently hardy for assessing drainage areas for on-site waste disposal systems.

    Kit includes one each JMC Featherweight Handgrip, Extension, and Auger.

    US$246.31
  • PN232 - 18 inch spacer for ESP Tubes

    This reusable spacer allows you to fit an 18 inch liner into a 36 inch ESP Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

    US$31.83
  • PN472 JMC Environmental Fate Sampling System

    The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. Compatible with the JMC Environmentalist Sub-Soil Probe or any hydraulic soil probe, it maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples.
    US$2241.72
  • PN131 JMC Cleaning Brush

    This brush works well for removing particles of soil and other debris from JMC Sampling Tubes, JMC Augers and the JMC Environmental Fate Sampler.

    US$18.50
  • PN426 JMC 36 inch Sampling Tube for JMC ESP PLUS

    • Accepts liners up to 36 inches long.
    • Includes Standard Cutting Tip.
    US$440.76
  • PN164 Impact Cushioning Washer for JMC ESP

    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$9.92

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *