641-792-8285 Contact Us

PN067 JMC 3 inch Quick Connect Professional Mud Auger

PN067 JMC 3 inch Quick Connect Professional Mud Auger

Share this Product

Details

Weight
1.75 lbs
Our price
US$254.08

Options

Quantity

Product Description

Our JMC Quick Connect Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Sample removes easily from auger - just invert auger and thump handgrip on the ground.

  • 3 inch Augers cut 3.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all JMC Quick Connect Auger Handgrips and Extensions.
    Special Note: If you want only one auger for a variety of sampling conditions, we recommend the JMC Quick Connect Clay Auger rather than the JMC Quick Connect General Purpose Auger. Contrary to its name, the clay auger is the most adaptable to the widest range of soil. conditions.
  • Recommended

  • Reviews

  • Send

  • PN448 Bosch 11316 Percussion Hammer & Case w/Adapter for ESP PLUS

    • Reduces operator fatigue.
    • Punches through frozen and compacted soils.
    • Slips easily onto ESP PLUS sampling tubes or extensions with proprietary adapter.
    • Runs on standard AC current or 1600 watt electric generator.
    US$1647.12
  • PN002 JMC Backsaver N-3 Handle with Special Cleaner

    • Samples to 66 inches with an 18 inch JMC Sampling Tube.
    • No bending over.
    • Sampling tubes sold separately.
    US$616.99
  • PN017 Dead Blow Mallet

    Soft-faced mallet for penetrating hard ground with a JMC T-Handle or JMC Driveable Auger Handgrip.
    US$77.10
  • PN233 - 24 inch spacer for ESP Tubes

    This reusable spacer allows you to fit an 12 inch liner into a 36 inch ESP Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

    US$38.82
  • Auger System(Clay)

    Let us help build your sampling kit. We'll make sure you have everything you need to get started sampling the moment you receive your kit.

    US$0.00
  • PN164 Impact Cushioning Washer for JMC ESP

    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$13.43
  • PN453 Aluminum Cylinder for ESP PLUS

    Component part of Guide Rod assembly for JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler).

    • Precision machined aluminum
    • Milled flats for tightening with a wrench
    US$93.36
  • PN445 Footpedal for JMC ESP PLUS

    Replacement footpedal for the JMC Environmentalist's Sub-Soil Probe PLUS. Footpedal usually needs replaced when foot-operated jack slips while extracting sampling tube from the ground.
    US$200.64
  • PN167 Aluminum Oxide Abrasive (3 oz)

    Small squeeze bottle of Aluminum Oxide Abrasive. Necessary to "rough up" the exterior of new sampling tubes so the foot operated jack will grip them.
    US$21.53

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *