641-792-8285 Contact Us
Print

PN066 JMC 3 inch Quick Connect, Professional Sand Auger

PN066 JMC 3 inch Quick Connect, Professional Sand Auger

Share this Product

Details

Weight
4.75 lbs
Our price
US$369.11

Options

Quantity

Product Description

Our JMC Quick Connect Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Sample removes easily from auger - just invert auger and thump handgrip on the ground.

  • 3 inch Augers cut 3.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all JMC Quick Connect Auger Handgrips and Extensions.
    Special Note: If you want only one auger for a variety of sampling conditions, we recommend the JMC Quick Connect Clay Auger rather than the JMC Quick Connect General Purpose Auger. Contrary to its name, the clay auger is the most adaptable to the widest range of soil. conditions.

  • Recommended

  • Reviews

  • Send
  • PN014 JMC 12 inch Zero Contamination Sampling Tube

    PN014 JMC 12 inch Zero Contamination Sampling Tube
    This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 12 inches long by 0.8 inches in diameter.
    US$317.36
  • PN431 Set of 15, PETG 48 inch Liners w/ Caps

    PN431 Set of 15, PETG 48 inch Liners w/ Caps
    Replacement liner for PN425a JMC Environmentalist's Sub-Soil Probe Plus' 48 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.
    US$77.65
  • PN069 JMC 3 inch Professional General Purpose Auger

    PN069 JMC 3 inch Professional General Purpose Auger
    Good for most soils between dry sand and clay. Fits all threaded connection JMC Professional Auger components.
    US$348.87
  • PN180 Vise-Grip Chain Wrench

    PN180 Vise-Grip Chain Wrench
    Remove cutting tips easily from JMC Environmentalist's Sub-Soil Probe (and Sub-Soil Probe Plus) Sampling tubes! Use one wrench to lock tightly around your sampling tube and another to clamp onto your cutting tip. With two comfortable handgrips, you can unscrew even the most stubborn connection.
    US$65.01
  • PN238 - 6 inch spacer for ESP and Zero Contamination Tubes

    PN238 - 6 inch spacer for ESP and Zero Contamination Tubes

    This reusable spacer allows you to fit a 12 inch liner into an 18 inch Zero Contamination Tube. It would also fill the empty space in a 36 inch ESP Sampling containing one 12 inch and one 18 inch liner.

    Remember the spacer sits on TOP of the PETG Copolyester or Stainless Steel liners inside your sampling tube.

    US$27.95
  • PN001(SD) JMC Backsaver Handle with Special Cleaner, Zero Contamination Tube, and Concentric Sampling Tube

    PN001(SD) JMC Backsaver Handle with Special Cleaner, Zero Contamination Tube, and Concentric Sampling Tube
    • Concentric Sampling Tube gathers 2 inch diameter sample and plants a metal casing in the ground.
    • Zero Contamination Tube gathers 0.8 inch diameter sample down to 46 inches through Concentric Tube’s casing.
    US$1707.94
  • PN463 - 36 inch spacer for ESP Plus Tubes

    PN463 - 36 inch spacer for ESP Plus Tubes

    This reusable spacer allows you to fit one 12 inch liner into a 48 inch ESP Plus Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

    US$49.36
  • PN164 Impact Cushioning Washer for JMC ESP

    PN164 Impact Cushioning Washer for JMC ESP
    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$13.43
  • PN245 Pedal Depressor Pivot Bolt & Locknut

    PN245 Pedal Depressor Pivot Bolt & Locknut
    Pivot bolt and locknut for ESP or ESP+ pedal depressor.
    US$2.94

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *
 
Back to Top

Categories

Links

Help

Contact Us

  • Map & Contact Us
  • 641-792-8285
  • 641-792-1361

Testimonials

After 25 years of guessing, I decided to get soil samples of my landscape beds tested. I bought...

Bob Reynolds

Submit a Testimonial More...

Copyright © 2007-2025 JMC Soil Samplers