641-792-8285 Contact Us

PN070 JMC 3 inch Professional Clay Auger

PN070 JMC 3 inch Professional Clay Auger

Share this Product

Details

Weight
3.25 lbs
Our price
US$330.05

Options

Quantity

Product Description

Our JMC Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Sample removes easily from auger - just invert auger and thump handgrip on the ground.

  • 3 inch Augers cut 3.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all threaded connection JMC Auger Handgrips and JMC Auger Extensions.
    Special Note: If you want only one auger for a variety of sampling conditions, we recommend the JMC Clay Auger rather than the JMC General Purpose Auger. Contrary to its name, the clay auger is the most adaptable to the widest range of soil. conditions.
  • Related

  • Recommended

  • Reviews

  • Send

  • PN230 JMC Pin Ejection Tool

    Removes crosspins quickly and easily from extensions for the JMC Environmentalist's Sub-Soil Probe and JMC Environmentalist's Sub-Soil Plus.
    US$106.61
  • PN223 Bosch 11316 Percussion Hammer & Case w/Adapter for ESP

    • Reduces operator fatigue.
    • Punches through frozen and compacted soils.
    • Slips easily onto sampling tubes or extensions with proprietary adapter.
    • Runs on standard AC current or 1600 watt electric generator.
    US$1264.23
  • PN006 JMC 12 inch Wet Sampling Tube

    Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.
    US$79.89
  • PN005 JMC 13 inch Rod Extension

    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.
    US$51.28
  • PN071 JMC 3 inch Professional Sand Auger

    Good for dry and wet sands. Fits all threaded connection JMC Professional Auger components.
    US$273.78
  • PN001(PT/SM) JMC Backsaver Handle with Sampling Tube

    Fitted with an 18 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 46 inches without bending over.

    US$487.31
  • PN131 JMC Cleaning Brush

    This brush works well for removing particles of soil and other debris from JMC Sampling Tubes, JMC Augers and the JMC Environmental Fate Sampler.

    US$18.50
  • PN043 Footpedal for JMC Backsaver Handles

    Replacement footpedal for JMC Backsaver and Backsaver N-3 Handles.
    (Will NOT fit the JMC Backsaver N-2 Handle.)

    US$65.30
  • PN164 Impact Cushioning Washer for JMC ESP

    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$9.92

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *