PN177 Wet Soils Cutting Tip for JMC ESP Sampling Tubes

• 

  PN184 Core Guide for ESP Sampling Tube

  Replacement part. Sandwiched between lower end of sampling tube and cutting tip. Directs flow of soil into the liner. Without it, clay samples have a tendency to crumple the plastic liners.

  US$28.48
• 

  PN150 JMC Environmentalist's Sub-Soil Probe

  The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$2646.35

• 

  PN176 Standard Cutting Tip for JMC ESP Sampling Tubes

  Replacement cutting tip for most soil types.

  US$98.78
• 

  PN025 JMC Auger Handgrip (threaded connection)

  Compatible with all threaded connection JMC Professional Augers and Extensions. Should NOT be struck with a mallet.

  US$69.16
• 

  PN160 Pin for ESP Extensions

  Replacement pin for both Master and Regular ESP Extensions.

  US$7.70
• 

  PN231 - 12 inch spacer for ESP and Zero Contamination Tubes

  This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liners inside your sampling tube.

  US$27.66
• 

  PN016(SoilFert) JMC T-Handle, Mallet, Extensions & Sampling Tube

  Penetrates hard ground with aid of soft-faced mallet. Depths to several feet obtainable with extra JMC Rod Extensions

  US$255.65
• 

  PN131 JMC Cleaning Brush

  This brush works well for removing particles of soil and other debris from JMC Sampling Tubes, JMC Augers and the JMC Environmental Fate Sampler.

  US$18.50
• 

  PN161 Aluminum Cylinder for ESP

  Component part of Guide Rod assembly for JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Precision machined aluminum Milled flats for tightening with a wrench

  US$61.13
• 

  PN164 Impact Cushioning Washer for JMC ESP

  Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.

  US$9.92
• 

  PN434 Core Retainer Tool

  Easy to use hand tool for modifying plastic liners to retain slippery samples like sludge and sand.

  US$225.31

Login to post a review