641-792-8285 Contact Us

PN070(BB1) JMC 3" Clay Auger with Standard Handgrip

PN070(BB1) JMC 3" Clay Auger with Standard Handgrip

Share this Product

Details

Weight
5.12 lbs
Our price
US$399.21

Options

Quantity

Product Description


Pictured Above: Our JMC Standard Auger Handgrip

Pictured Above: Our JMC 3 inch Professional Clay Auger

JMC Standard Auger Handgrip

  • Compatible with all threaded connection JMC Professional Augers and Extensions.
  • Heavy-Duty construction to withstand field abuse.
  • Nickel-Plated to protect against rust and wear.
  • Not designed to be used with a mallet.

JMC 3 inch Professional Clay Auger

Our JMC Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Remove the sample easily - just invert auger and thump handgrip on the ground. If the sample sticks, you can reach the sample easily through the windows laser-cut into the sides of the auger.

  • 3 inch Augers cut 3.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all threaded connection JMC Auger Handgrips and JMC Auger Extensions
Note: Contrary to its name, the clay auger, and not our General Purpose Auger, is the most adaptable to the widest range of soil conditions.
  • Recommended

  • Reviews

  • Send

  • PN177 Wet Soils Cutting Tip for JMC ESP Sampling Tubes

    Replacement cutting tip for saturated soils where compaction of the soil sample is a problem.
    US$119.11
  • PN441 Wet Soils Cutting Tip for JMC ESP Plus Sampling Tubes

    Replacement cutting tip for saturated soils where compaction of the soil sample is a problem.
    US$132.94
  • PN111 JMC Driveable Auger Handgrip (threaded connection)

    Compatible with all threaded connection JMC Professional Augers and Extensions. Can be struck with a mallet.
    US$106.92
  • PN154 Set of 15, PETG 48 inch Liners w/ Caps

    Replacement liner for JMC Environmentalist's Sub-Soil Probe's 48 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.
    US$68.90
  • PN065 JMC 3 inch Quick Connect, Professional Clay Auger

    In spite of its name, the Clay Auger will sample the widest variety of soils. Good for most soils between dry sand and wet mud. Fits all JMC Quick Connect Professional Auger components.
    US$333.46
  • PN039 JMC Collapsible Soil Sampler with Screw Auger & 12 inch Wet Sampling Tube

    • Very compact! Disassembled measures 13 x 3 x 2 inches.
    • Self-sharpening, hardened cutting tip lasts 8x longer than most replaceable tips.
    • JMC Screw Auger penetrates more difficult soils.
    • Sampling tube works best in soft moist soils.
    • Sample Diameter: 0.688 inches.
    • Handle fits other JMC sampling tubes.
    US$340.68
  • PN138 JMC 5 Foot Tile Probe

    For determining the location of buried tile drains, pipes, storage drums, rocks and clay barriers

    • Easy ground penetration and retraction
    • Nickle-plated steel construction
    • No moving parts
    US$52.10
  • PN433 Guide Rod Assembly for JMC ESP PLUS

    Assembly fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS (1.2 inch diameter sampler). This is the part that rests on the top of the sampling tube that fits up inside the heavy sleeve of the hammer.
    US$231.66
  • PN167 Aluminum Oxide Abrasive (3 oz)

    Small squeeze bottle of Aluminum Oxide Abrasive. Necessary to "rough up" the exterior of new sampling tubes so the foot operated jack will grip them.
    US$19.89

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *