641-792-8285 Contact Us
Print

PN071(BB1) JMC 3" Sand Auger with Standard Handgrip

PN071(BB1) JMC 3" Sand Auger with Standard Handgrip

Share this Product

Details

Weight
6.12 lbs
Our price
US$436.29

Options

Quantity


Product Description

Photo: JMC Standard Auger Handgrip
Pictured Above: Our JMC Standard Auger Handgrip		JMC 3 inch Professional Sand Auger
Pictured Above: Our JMC 3 inch Professional Sand Auger

JMC Standard Auger Handgrip

  • Compatible with all threaded connection JMC Professional Augers and Extensions.
  • Heavy-Duty construction to withstand field abuse.
  • Nickel-Plated to protect against rust and wear.
  • Not designed to be used with a mallet.

JMC 3 inch Professional Sand Auger

Our JMC Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Remove the sample easily - just invert auger and thump handgrip on the ground.

  • 3 inch Augers cut 3.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all threaded connection JMC Auger Handgrips and JMC Auger Extensions
Note: Similar in design to the JMC Professional General Purpose Auger, the JMC Professional Sand Auger works best in slightly moist to wet sands and similar materials.

  • Recommended

  • Reviews

  • Send
  • PN432 Pin for ESP PLUS Extensions

    PN432 Pin for ESP PLUS Extensions
    Replacement pin for both Master and Regular ESP Plus Extensions.
    US$10.98
  • PN400 JMC 2 by 6 inch Concentric Sampling Tube

    PN400 JMC 2 by 6 inch Concentric Sampling Tube

    Developed for soil dissipation studies, but can be used like any of our sampling tubes. Sampling tube fills a plastic liner 2 inches in diameter by 6 inches long. Best for shallow sampling applications, this tube fits most of our JMC sampling devices, but may require an adapter.

    US$905.95
  • PN056 12 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    PN056 12 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

    Stainless steel liner 12" long. Although made for the JMC 12" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe and the JMC 18 inch Zero Contamination Tube when used with Spacers.

    US$26.76
  • PN232 - 18 inch spacer for ESP Tubes

    PN232 - 18 inch spacer for ESP Tubes

    This reusable spacer allows you to fit an 18 inch liner into a 36 inch ESP Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

    US$34.44
  • PN001(PT/SM) JMC Backsaver Handle with Sampling Tube

    PN001(PT/SM) JMC Backsaver Handle with Sampling Tube

    Fitted with an 18 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 46 inches without bending over.

    US$628.06
  • PN473 JMC Environmental Fate Deluxe Sampling System

    PN473 JMC Environmental Fate Deluxe Sampling System
    The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.
    US$4293.56
  • PN461 - 18 inch spacer for ESP Plus Tubes

    PN461 - 18 inch spacer for ESP Plus Tubes

    This reusable spacer allows you to fit one 18 inch liner into a 36 inch ESP Plus Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

    US$31.27
  • PN164 Impact Cushioning Washer for JMC ESP

    PN164 Impact Cushioning Washer for JMC ESP
    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$13.43
  • PN201 Hammer for ESP or ESP PLUS

    PN201 Hammer for ESP or ESP PLUS
    The heavy (12 pounds) metal sleeve that moves up and down while pounding the sampling tube into the ground. Fits both the JMC Environmentalist's Sub-Soil Probe and the JMC Environmentalist's Sub-Soil Probe PLUS.
    US$556.34

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *
 
Back to Top

Categories

Links

Help

Contact Us

  • Map & Contact Us
  • 641-792-8285
  • 641-792-1361

Testimonials

After 25 years of guessing, I decided to get soil samples of my landscape beds tested. I bought...

Bob Reynolds

Submit a Testimonial More...

Copyright © 2007-2025 JMC Soil Samplers