PN461 - 18 inch spacer for ESP Plus Tubes

• 

  PN425 JMC Environmentalist's Sub-Soil Probe PLUS

  The ESP PLUS pulls a 3 (or 4) foot long by 1.2 inch diameter sample in one plunge. It captures every sample in a plastic liner and can sample to 3 (or 4) feet. Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3889.62

• 

  PN437 - 1.75" Carbide Bit for Bosch Rotary Hammers

  If you need to gather samples beneath a concrete pad, this carbide bit can drill a hole large enough to allow a ESP Plus Sampling Tube to pass through.

  US$434.54
• 

  PN007 JMC 12 inch Dry Sampling Tube

  Works well in hard, dry soils. Sample core measures 9 inches long by 0.75 inches diameter.

  US$101.71
• 

  PN072 JMC 2 inch Professional General Purpose Auger

  Good for most soils between dry sand and clay. Fits all threaded connection JMC Professional Auger components.

  US$337.89
• 

  PN224 Bosch Adapter Only for ESP(Fits Bosch 11316, 11245, and RH1255VC Hammers)

  Already have a Bosch 11316 Percussion Hammer, 11245 Rotary Hammer, or Bosch RH1255VC Rotary Hammer? Then all you need is this adapter for your JMC Environmentalist's Sub-Soil Probe.

  US$330.79
• 

  PN050 JMC Low Cost 18 inch Sampler

  Samples down to 15 inches. Self-sharpening cutting tip. Nickel-plated, DOM high strength steel.

  US$59.67
• 

  PN232 - 18 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 18 inch liner into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$34.44
• 

  PN460 - 12 inch spacer for ESP Plus Tubes

  This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Plus Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

  US$25.27
• 

  PN055(SoilFert) JMC Conventional Handle with Sampling Tube

  The JMC Conventional Handle with Sampling Tube gathers samples down to 18 inches.

  US$198.80
• 

  PN433 Guide Rod Assembly for JMC ESP PLUS

  Assembly fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS (1.2 inch diameter sampler). This is the part that rests on the top of the sampling tube that fits up inside the heavy sleeve of the hammer.

  US$300.41

Login to post a review