641-792-8285 Contact Us

PN434 Core Retainer Tool

PN434 Core Retainer Tool

Share this Product

Details

Weight
1.00 lbs
Our price
US$225.31

Options

Quantity

Product Description

The Quick Solution to Sampling Sludge and Sand.

Stop losing non cohesive samples down the hole when trying to extract them from the ground. The JMC Core Retainer Tool quickly converts one end of your replaceable liner into core retainer. As you can see from the photos, it is a simple matter to punch as many "fingers" as you need to hold the sample inside the liner as you pull the sample out of the ground. The tool is as simple to use as a paper punch. Provided you don't lose it, it should last for years.

  • Works with any size plastic liner.
  • Minimizes effort needed to extract non-cohesive samples.
  • Fast and easy to use.
  • Compatible with all items listed below in "Related Products".

Here's how the JMC Core Retainer Tool works:
Photo: JMC Core Retainer modifying plastic liner Photo: Plastic liner after first punch completed
A: JMC Core Retainer modifying a plastic liner.
B: Plastic liner after first punch completed.
&nbspPhoto: End view of finished liner&nbsp
&nbspC: End view of completed modification. Fingers punched by JMC Core Retainer Tool will allow sample to fill liner easily but will help prevent sample from falling out of the liner during sampler extraction.&nbsp
  • Related

  • Recommended

  • Reviews

  • Send

  • PN047 Set of 15, PETG 12 inch Liners w/ Caps

    Replacement liners for JMC 12 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$29.65
  • PN058 Set of 15, PETG 18 inch Liners w/ Caps

    Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.
    US$42.55
  • PN153 Set of 15, PETG 36 inch Liners w/ Caps

    Replacement liner for JMC Environmentalist's Sub-Soil Probe's 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.
    US$65.45
  • PN154 Set of 15, PETG 48 inch Liners w/ Caps

    Replacement liner for JMC Environmentalist's Sub-Soil Probe's 48 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.
    US$68.90
  • PN430 Set of 15, PETG 36 inch Liners w/ Caps

    Replacement liner for JMC Environmentalist's Sub-Soil Probe Plus' 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.
    US$73.75
  • PN431 Set of 15, PETG 48 inch Liners w/ Caps

    Replacement liner for PN425a JMC Environmentalist's Sub-Soil Probe Plus' 48 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.
    US$77.65
  • PN437 - 1.75" Carbide Bit for Bosch 11245 Rotary Hammer

    If you need to gather samples beneath a concrete pad, this carbide bit can drill a hole large enough to allow a ESP Plus Sampling Tube to pass through.
    US$358.53
  • PN062 JMC 34 inch Quick-Connect Auger Extension

    Fits all JMC Quick Connect Auger Extensions as well as all JMC Quick Connect Handgrips and Augers.
    US$105.41
  • PN018 JMC Special Cleaner

    • Cleans JMC standard sampling tubes quickly and thoroughly.
    • Minimizes effort needed to extract samples.
    • Lubricates tube for easier sampling and corrosion resistance.
    • Keeps hands clean and uninjured.
    US$64.36
  • PN050 JMC Low Cost 18 inch Sampler

    • Samples down to 15 inches.
    • Self-sharpening cutting tip.
    • Nickel-plated, DOM high strength steel.
    US$45.74
  • PN463 - 36 inch spacer for ESP Plus Tubes

    This reusable spacer allows you to fit one 12 inch liner into a 48 inch ESP Plus Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

    US$40.73
  • PN045 Pushrod for JMC Backsaver Handle

    Replacement pushrod for PN001 JMC Backsaver Handle.

    Does NOT fit the PN002 JMC Backsaver N-3 or PN003 JMC Backsaver N-2 Handles.

    US$66.00
  • PN164 Impact Cushioning Washer for JMC ESP

    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$9.92
  • PN167 Aluminum Oxide Abrasive (3 oz)

    Small squeeze bottle of Aluminum Oxide Abrasive. Necessary to "rough up" the exterior of new sampling tubes so the foot operated jack will grip them.
    US$19.89
  • PN001 (N-Tracker) JMC Backsaver Handle with Sampling Tube

    Fitted with an 15 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 43 inches without bending over.

    US$489.84

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *