PN443 Solid Point for JMC ESP Plus Sampling Tubes

• 

  PN425 JMC Environmentalist's Sub-Soil Probe PLUS

  The ESP PLUS pulls a 3 (or 4) foot long by 1.2 inch diameter sample in one plunge. It captures every sample in a plastic liner and can sample to 3 (or 4) feet. Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3889.62

• 

  PN437 - 1.75" Carbide Bit for Bosch Rotary Hammers

  If you need to gather samples beneath a concrete pad, this carbide bit can drill a hole large enough to allow a ESP Plus Sampling Tube to pass through.

  US$434.54
• 

  The JMC Backsaver Handle Soil Sampling Kit

  Pulls samples 9 to 15 inches long. Samples to 8 feet with extensions. Handle stays near waist level at all times - no bending over! Carry it anywhere you can walk. Includes cleaning tool for sampling tubes. 0.6 to 1.2 inch diameter sampling tubes available.

  US$0.00

  OUT OF STOCK
• 

  PN013 JMC 18 inch Large Diameter Sampling Tube

  Sample core measures 15 inches long by 1.25 inches diameter - almost 3 times the volume of our 18 inch Dry Sampling Tube!

  US$215.65
• 

  PN099 JMC Quick Connect 2 inch Professional General Purpose Auger

  Good for most soils between dry sand and clay. Fits all JMC Quick Connect Professional Auger components.

  US$428.18
• 

  PN055(CA21) JMC Conventional Handle with Sampling Tube

  The JMC Conventional Handle with Sampling Tube gathers samples down to 18 inches.

  US$198.80
• 

  PN162 Guide Rod for ESP and ESP Plus

  Threaded Guide Rod fits manual sliding hammer for both the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler) and the JMC Environmentalist's Sub-Soil Probe Plus (1.2 inch diameter sampler).

  US$97.71
• 

  PN202 Guide Rod Assembly for JMC ESP

  Assembly fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). This is the part that rests on the top of the sampling tube that fits up inside the heavy sleeve of the hammer.

  US$254.64
• 

  PN434 Core Retainer Tool

  Easy to use hand tool for modifying plastic liners to retain slippery samples like sludge and sand.

  US$286.45
• 

  Test Kit

  test kit

  US$0.00

  OUT OF STOCK

Login to post a review