PN460 - 12 inch spacer for ESP Plus Tubes

• 

  PN425 JMC Environmentalist's Sub-Soil Probe PLUS

  The ESP PLUS pulls a 3 (or 4) foot long by 1.2 inch diameter sample in one plunge. It captures every sample in a plastic liner and can sample to 3 (or 4) feet. Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3889.62
• 

  PN430 Set of 15, PETG 36 inch Liners w/ Caps

  Replacement liner for JMC Environmentalist's Sub-Soil Probe Plus' 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

  US$73.75

• 

  PN153 Set of 15, PETG 36 inch Liners w/ Caps

  Replacement liner for JMC Environmentalist's Sub-Soil Probe's 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

  US$65.45
• 

  PN158 JMC ESP Regular Extension

  This extension lets you sample three feet deeper provided you have a ESP Sampling Tube and a JMC ESP Master Extension. Regular extensions connect to each other for additional sampling depth capability.

  US$211.86
• 

  PN025 JMC Auger Handgrip (threaded connection)

  Compatible with all threaded connection JMC Professional Augers and Extensions. Should NOT be struck with a mallet.

  US$87.42
• 

  PN131 JMC Cleaning Brush

  This brush works well for removing particles of soil and other debris from JMC Sampling Tubes, JMC Augers and the JMC Environmental Fate Sampler.

  US$23.83
• 

  PN473 JMC Environmental Fate Deluxe Sampling System

  The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.

  US$4293.56
• 

  PN462 - 24 inch spacer for ESP Plus Tubes

  This reusable spacer allows you to fit one 12 inch liner into a 36 inch ESP Plus Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

  US$37.31
• 

  PN452 Impact Cushioning Washer for JMC ESP PLUS

  Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN453). This is the part that rests on the top of the sampling tube.

  US$15.16
• 

  PN245 Pedal Depressor Pivot Bolt & Locknut

  Pivot bolt and locknut for ESP or ESP+ pedal depressor.

  US$2.94
• 

  PN040 Collapsible Handgrip

  Collapsible Handgrip

  US$43.17

Login to post a review