PN245 Pedal Depressor Pivot Bolt & Locknut

• 

  PN437 - 1.75" Carbide Bit for Bosch Rotary Hammers

  If you need to gather samples beneath a concrete pad, this carbide bit can drill a hole large enough to allow a ESP Plus Sampling Tube to pass through.

  US$434.54
• 

  PN009 JMC 15 inch Dry Sampling Tube

  Works well in hard, dry soils. Sample core measures 12 inches long by 0.75 inches diameter.

  US$105.04
• 

  PN014 JMC 12 inch Zero Contamination Sampling Tube

  This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 12 inches long by 0.8 inches in diameter.

  US$317.36
• 

  PN057 JMC 18 inch Zero Contamination Sampling Tube

  This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 18 inches long by 0.8 inches in diameter.

  US$387.07
• 

  PN031 JMC 36 inch Low Cost Sampler with Step

  Samples down to 12 inches. Footpedal offers extra leverage for penetrating hard ground. Self-sharpening cutting tip. Nickel-plated, DOM high strength steel.

  US$102.61

  OUT OF STOCK
• 

  PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

  Stainless steel liner 18" long. Although made for the JMC 18" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe when used with Spacers.

  US$36.19
• 

  PN055(CA21) JMC Conventional Handle with Sampling Tube

  The JMC Conventional Handle with Sampling Tube gathers samples down to 18 inches.

  US$198.80
• 

  PN016(SoilFert) JMC T-Handle, Mallet, Extensions & Sampling Tube

  Penetrates hard ground with aid of soft-faced mallet. Depths to several feet obtainable with extra JMC Rod Extensions

  US$349.81
• 

  PN110 Auger Thread to Sampling Tube Adapter (7/8" to 1/2")

  Adapter lets you use JMC Sampling Tubes with JMC Threaded Auger Extensions and Handgrips.

  US$89.40

Login to post a review