PN249 Bolt & Nut, ESP & ESP Plus Footpedal Release

• 

  PN230 JMC Pin Ejection Tool

  Removes crosspins quickly and easily from extensions for the JMC Environmentalist's Sub-Soil Probe and JMC Environmentalist's Sub-Soil Plus.

  US$136.19
• 

  PN008 JMC 15 inch Wet Sampling Tube

  Work best in soft, moist soils. Sample core measures 12 inches long by 0.688 inches diameter.

  US$105.04
• 

  PN001(PT/SM) JMC Backsaver Handle with Sampling Tube

  Fitted with an 18 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 46 inches without bending over.

  US$628.06
• 

  PN139 JMC 42 inch Dakota Probe

  Pulls a 42 inch sample. Self-sharpening cutting tip Nickel-plated, DOM high strength steel.

  US$272.87
• 

  PN473 JMC Environmental Fate Deluxe Sampling System

  The JMC Environmental Fate Sampler takes a 6 inch diameter by 2 inch deep sample. It maximizes recovery of surface applied chemicals on day zero and greatly reduces surface contamination risk to subsequent samples. The Deluxe system adds components to reduce processing time.

  US$4293.56
• 

  PN277 JMC Collapsible Soil Sampler with 12 inch Ag Consultant's Sampling Tube

  Very compact! Disassembled system measures 13 x 3 x 2 inches. Self-sharpening, hardened cutting tip lasts 8 times longer than common replaceable tips. Sampling tube works best in dry soils. Sample Diameter is 0.56 inches. Handle fits other JMC sampling tubes.

  US$196.75
• 

  PN462 - 24 inch spacer for ESP Plus Tubes

  This reusable spacer allows you to fit one 12 inch liner into a 36 inch ESP Plus Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

  US$37.31
• 

  PN452 Impact Cushioning Washer for JMC ESP PLUS

  Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN453). This is the part that rests on the top of the sampling tube.

  US$15.16
• 

  PN245 Pedal Depressor Pivot Bolt & Locknut

  Pivot bolt and locknut for ESP or ESP+ pedal depressor.

  US$2.94

Login to post a review