641-792-8285 Contact Us

PN068 Quick-Connect Auger to Sampling Tube Adapter (QC to 1/2")

PN068 Quick-Connect Auger to Sampling Tube Adapter (QC to 1/2")

Share this Product

Details

Weight
1.02 lbs
Our price
US$88.34

Options

Quantity

Product Description

If you already own a JMC Quick-Connect Professional Auger, you don't need to invest in a new handle and extensions just to pull a soil core. All you need is this Adapter and your choice of a JMC Soil Sampling Tube.

In fact, if you want to obtain an extremely accurate sample from a particular strata, you will have the best results with this procedure:

  1. Carve a hole with your auger down to the top of the desired strata.
     
  2. Replace the auger head with this adapter and a JMC Sampling Tube.
          (We recommend the JMC Zero Contamination Tube for this application.)
     
  3. Remove any loose debris inside the hole with a vacuum cleaner.
     
  4. Lower the sampling tube into the hole and take your sample.
     

Tip: A JMC Driveable Auger Handgrip and a PN017 Dead-Blow Mallet (See Related Products List below) will make tube sampling easier. If desired, the hole may be deepened by reinstalling the auger and reentering the same hole.

  • Related

  • Recommended

  • Reviews

  • Send

  • PN061 JMC Quick-Connect Driveable Auger Handgrip

    Compatible with all JMC Quick Connect Augers and Extensions. Can be struck with a mallet.
    US$129.06
  • PN017 Dead Blow Mallet

    Soft-faced mallet for penetrating hard ground with a JMC T-Handle or JMC Driveable Auger Handgrip.
    US$63.42
  • PN230 JMC Pin Ejection Tool

    Removes crosspins quickly and easily from extensions for the JMC Environmentalist's Sub-Soil Probe and JMC Environmentalist's Sub-Soil Plus.
    US$109.80
  • PN013 JMC 18 inch Large Diameter Sampling Tube

    Sample core measures 15 inches long by 1.25 inches diameter - almost 3 times the volume of our 18 inch Dry Sampling Tube!
    US$196.97
  • PN070 JMC 3 inch Professional Clay Auger

    In spite of its name, the Clay Auger will sample the widest variety of soils. Good for most soils between dry sand and wet mud. Fits all threaded connection JMC Professional Auger components.
    US$339.95
  • PN001(CA22) JMC Backsaver Handle with Sampling Tube

    Fitted with an 18 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 46 inches without bending over.

    US$501.93
  • PN016(SoilFert) JMC T-Handle, Mallet, Extensions & Sampling Tube

    • Penetrates hard ground with aid of soft-faced mallet.
    • Depths to several feet obtainable with extra JMC Rod Extensions
    US$263.32
  • PN097 JMC Featherweight Auger

    • 55% lighter than our JMC Professional Auger
    • Fits our JMC Featherweight Auger Handgrip and JMC Featherweight Auger Extensions.
    • Quick Connect assembly with push button release.

    (Note: Featherweight Auger is not compatible with JMC Professional Auger Extensions.)

    US$159.63
  • PN110 Auger Thread to Sampling Tube Adapter (7/8" to 1/2")

    Adapter lets you use JMC Sampling Tubes with JMC Threaded Auger Extensions and Handgrips.
    US$75.98
  • PN164 Impact Cushioning Washer for JMC ESP

    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$10.21
  • PN434 Core Retainer Tool

    Easy to use hand tool for modifying plastic liners to retain slippery samples like sludge and sand.
    US$232.07

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *