PN132 24 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

• 

  PN231 - 12 inch spacer for ESP and Zero Contamination Tubes

  This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liners inside your sampling tube.

  US$29.93
• 

  PN233 - 24 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 12 inch liner into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$38.82

• 

  PN448 Bosch 11316 Percussion Hammer & Case w/Adapter for ESP PLUS

  Reduces operator fatigue. Punches through frozen and compacted soils. Slips easily onto ESP PLUS sampling tubes or extensions with proprietary adapter. Runs on standard AC current or 1600 watt electric generator.

  US$1647.12
• 

  PN002 JMC Backsaver N-3 Handle with Special Cleaner

  Samples to 66 inches with an 18 inch JMC Sampling Tube. No bending over. Sampling tubes sold separately.

  US$616.99
• 

  PN017 Dead Blow Mallet

  Soft-faced mallet for penetrating hard ground with a JMC T-Handle or JMC Driveable Auger Handgrip.

  US$77.10
• 

  PN233 - 24 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 12 inch liner into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$38.82
• 

  Auger System(Clay)

  Let us help build your sampling kit. We'll make sure you have everything you need to get started sampling the moment you receive your kit.

  US$0.00

  OUT OF STOCK
• 

  PN164 Impact Cushioning Washer for JMC ESP

  Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.

  US$13.43
• 

  PN453 Aluminum Cylinder for ESP PLUS

  Component part of Guide Rod assembly for JMC Environmentalist's Sub-Soil Probe PLUS(1.2 inch diameter sampler). Precision machined aluminum Milled flats for tightening with a wrench

  US$93.36
• 

  PN445 Footpedal for JMC ESP PLUS

  Replacement footpedal for the JMC Environmentalist's Sub-Soil Probe PLUS. Footpedal usually needs replaced when foot-operated jack slips while extracting sampling tube from the ground.

  US$200.64
• 

  PN167 Aluminum Oxide Abrasive (3 oz)

  Small squeeze bottle of Aluminum Oxide Abrasive. Necessary to "rough up" the exterior of new sampling tubes so the foot operated jack will grip them.

  US$21.53

Login to post a review