PN238 - 6 inch spacer for ESP and Zero Contamination Tubes

• 

  PN057 JMC 18 inch Zero Contamination Sampling Tube

  This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 18 inches long by 0.8 inches in diameter.

  US$387.07
• 

  PN150 JMC Environmentalist's Sub-Soil Probe

  The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.

  US$3296.78
• 

  PN014 JMC 12 inch Zero Contamination Sampling Tube

  This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 12 inches long by 0.8 inches in diameter.

  US$317.36

• 

  PN153 Set of 15, PETG 36 inch Liners w/ Caps

  Replacement liner for JMC Environmentalist's Sub-Soil Probe's 36 inch Sampling Tube available at lower prices when purchased in larger quantities. Click on details for more information.

  US$65.45
• 

  PN429 JMC ESP Plus Regular Extension

  This extension lets you sample three feet deeper provided you have a ESP Plus Sampling Tube and a JMC ESP Plus Master Extension. Regular extensions connect to each other for additional sampling depth capability.

  US$219.74
• 

  PN437 - 1.75" Carbide Bit for Bosch Rotary Hammers

  If you need to gather samples beneath a concrete pad, this carbide bit can drill a hole large enough to allow a ESP Plus Sampling Tube to pass through.

  US$434.54
• 

  PN130 JMC Ag Consultant's Special Cleaner

  Cleans JMC Ag Consultant's Sampling Tubes quickly and thoroughly. Minimizes effort needed to extract samples. Lubricates tube for easier sampling and corrosion resistance. Keeps hands clean and uninjured.

  US$89.80
• 

  PN415 Metal Casing for JMC 2 by 6 inch Concentric Sampling Tube

  In some situations, it may be expedient to plant several 2 inch diameter casings in the ground before returning to sample through each one. That is why we sell separate casings for the JMC 2 by 6 inch Concentric Sampling Tube. Remember: This is the casing only. You should already have a Concentric Sampling Tube.

  US$344.62
• 

  PN235- 36 inch spacer for ESP Tubes

  This reusable spacer allows you to fit an 12 inch liner into a 48 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

  US$47.71
• 

  PN110 Auger Thread to Sampling Tube Adapter (7/8" to 1/2")

  Adapter lets you use JMC Sampling Tubes with JMC Threaded Auger Extensions and Handgrips.

  US$89.40
• 

  PN165 Footpedal for JMC ESP

  Replacement footpedal for the JMC Environmentalist's Sub-Soil Probe. Footpedal usually needs replaced when foot-operated jack slips while extracting sampling tube from the ground.

  US$169.22
• 

  PN113 Standard Case for Backsaver, Backsaver N2 Handle, or Auger Equipment

  Fits the Backsaver and Backsaver N-2 handles as well as rod extensions and sampling tubes. Also holds augers with 34 inch extensions.

  US$207.63

Login to post a review