641-792-8285 Contact Us

PN061(Kit) JMC Quick-Connect Driveable Auger Handgrip

PN061(Kit) JMC Quick-Connect Driveable Auger Handgrip

Share this Product

Details

Weight
3.25 lbs
Our price
US$125.30

Options

Dead-Blow Hammer?
Quantity

Product Description

  • Fits all JMC Quick Connect Augers and Extensions.
  • May be struck with a soft-faced mallet.
  • Heavy-Duty construction to withstand field abuse.
  • Nickel-Plated to protect against rust and wear.

This handgrip withstands pounding from a soft-faced mallet like our PN017 Dead-Blow Mallet. You may find this helpful when trying to get a hole started in difficult ground conditions.




Another Advantage to Consider:

A Driveable Handgrip gives you the option of retrieving core samples with a sampling tube. Simply replace the auger at the end of your extensions with a JMC Sampling Tube and a PN068 JMC Auger to Sampling Tube Adapter and you are ready to go. (see picture at right)

In fact, if you want to obtain an extremely accurate sample from a particular strata, you will have the best results with this procedure:

  1. Carve a hole with your auger down to the top of the desired strata.
  2. Replace the auger head with any
    JMC Sampling Tube and a
    PN068 JMC Sampling Tube Adapter.
  3. Remove any loose debris inside the hole with a vacuum cleaner.
  4. Lower the sampling tube into the hole and take your sample.
Using Auger Extensions to obtain samples with a sampling tube.
Please Note: Sampling Tube Adapter and Sampling Tubes can be ordered with the links found in the Recommended Products List below. Clicking on the links will open a new window. You will not lose this page. After selecting your sampling tube(s) and adapter, just close the window and continue building your auger kit. When you finish building your kit, the tube(s) and adapter you selected will appear in your shopping cart along with the auger kit.
  • Related

  • Recommended

  • Reviews

  • Send

  • PN230 JMC Pin Ejection Tool

    Removes crosspins quickly and easily from extensions for the JMC Environmentalist's Sub-Soil Probe and JMC Environmentalist's Sub-Soil Plus.
    US$106.61
  • PN437 - 1.75" Carbide Bit for Bosch 11245 Rotary Hammer

    If you need to gather samples beneath a concrete pad, this carbide bit can drill a hole large enough to allow a ESP Plus Sampling Tube to pass through.
    US$358.53
  • PN014 JMC 12 inch Zero Contamination Sampling Tube

    This tube gathers undisturbed soil samples encased in removeable PETG Copolyester liners. Samples measure 12 inches long by 0.8 inches in diameter.
    US$257.30
  • PN069 JMC 3 inch Professional General Purpose Auger

    Good for most soils between dry sand and clay. Fits all threaded connection JMC Professional Auger components.
    US$272.96
  • PN107 JMC 3 inch Professional Mud Auger

    Good for mud and heavily saturated clay soils. Fits all threaded connection JMC Professional Auger components.
    US$190.41
  • PN017 Dead Blow Mallet

    Soft-faced mallet for penetrating hard ground with a JMC T-Handle or JMC Driveable Auger Handgrip.
    US$61.58
  • PN050 JMC Low Cost 18 inch Sampler

    • Samples down to 15 inches.
    • Self-sharpening cutting tip.
    • Nickel-plated, DOM high strength steel.
    US$45.74
  • PN001(PT/SM) JMC Backsaver Handle with Sampling Tube

    Fitted with an 18 inch JMC Sampling Tube, this handle allows you to gather soil samples down to 46 inches without bending over.

    US$487.31
  • PN235- 36 inch spacer for ESP Tubes

    This reusable spacer allows you to fit an 12 inch liner into a 48 inch ESP Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

    US$41.99

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *