641-792-8285 Contact Us
Print

PN072(BB1) JMC 2" General Purpose Auger with Standard Handgrip

PN072(BB1) JMC 2" General Purpose Auger with Standard Handgrip

Share this Product

Details

Weight
3.87 lbs
Our price
US$425.31

Options

Quantity


Product Description


Pictured Above: Our JMC Standard Auger Handgrip
Pictured Above: Our JMC 2 inch Professional General Purpose Auger

JMC Standard Auger Handgrip

  • Compatible with all threaded connection JMC Professional Augers and Extensions.
  • Heavy-Duty construction to withstand field abuse.
  • Nickel-Plated to protect against rust and wear.
  • Not designed to be used with a mallet.

JMC 2 inch Professional General Purpose Auger

Our JMC Professional Augers can sample to 30 feet in most soils. Each auger's precisely angled cutting blades pull the auger into the soil approximately 1 inch with every revolution of the handgrip. These blades cut a hole slightly larger than the auger barrel for easy retraction of the auger and sample. Remove the sample easily - just invert auger and thump handgrip on the ground.

  • 3 inch Augers cut 2.25 inch diameter holes.
  • Auger body laser cut from 1/8" DOM steel tubing.
  • Nickel-plated to protect against rust and wear.
  • Heat treated cutting blades coated with hard-surfacing material for increased durability.
  • Augers fit all threaded connection JMC Auger Handgrips and JMC Auger Extensions
Note: Contrary to its name, the clay auger, and not our General Purpose Auger, is the most adaptable to the widest range of soil conditions. For instance, unloading a heavily saturated clay sample in colder weather is much more difficult with the General Purpose Auger. The General Purpose auger, however, will do well in some drier soils that the Clay Auger can't sample.

  • Recommended

  • Reviews

  • Send
  • PN158 JMC ESP Regular Extension

    PN158 JMC ESP Regular Extension
    This extension lets you sample three feet deeper provided you have a ESP Sampling Tube and a JMC ESP Master Extension. Regular extensions connect to each other for additional sampling depth capability.
    US$211.86
  • PN074 JMC 2 inch Professional Sand Auger

    PN074 JMC 2 inch Professional Sand Auger
    Good for dry and wet sands. Fits all threaded connection JMC Professional Auger components.
    US$337.89
  • PN050 JMC Low Cost 18 inch Sampler

    PN050 JMC Low Cost 18 inch Sampler
    • Samples down to 15 inches.
    • Self-sharpening cutting tip.
    • Nickel-plated, DOM high strength steel.
    US$59.67
  • PN400 JMC 2 by 6 inch Concentric Sampling Tube

    PN400 JMC 2 by 6 inch Concentric Sampling Tube

    Developed for soil dissipation studies, but can be used like any of our sampling tubes. Sampling tube fills a plastic liner 2 inches in diameter by 6 inches long. Best for shallow sampling applications, this tube fits most of our JMC sampling devices, but may require an adapter.

    US$905.95
  • PN426 JMC 36 inch Sampling Tube for JMC ESP PLUS

    PN426 JMC 36 inch Sampling Tube for JMC ESP PLUS
    • Accepts liners up to 36 inches long.
    • Includes Standard Cutting Tip.
    US$550.23
  • PN046 Pushrod for JMC Backsaver N-3 Handle

    PN046 Pushrod for JMC Backsaver N-3 Handle

    Replacement pushrod for PN002 JMC Backsaver N-3 Handle.

    Does NOT fit the PN001 JMC Backsaver or PN003 JMC Backsaver N-2 Handles.

    US$102.94
  • PN163 Threaded Collar for ESP and ESP PLUS Guide Rod

    PN163 Threaded Collar for ESP and ESP PLUS Guide Rod

    Threaded Collar fits manual sliding hammer for both the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler) and the JMC Environmentalist's Sub-Soil Probe Plus (1.2 inch diameter sampler).

    US$50.78
  • PN164 Impact Cushioning Washer for JMC ESP

    PN164 Impact Cushioning Washer for JMC ESP
    Aluminum Washer fits manual sliding hammer for the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler). Fits between the Threaded Collar(PN163) and the Aluminum Cylinder(PN161). This is the part that rests on the top of the sampling tube.
    US$13.43
  • PN165 Footpedal for JMC ESP

    PN165 Footpedal for JMC ESP
    Replacement footpedal for the JMC Environmentalist's Sub-Soil Probe. Footpedal usually needs replaced when foot-operated jack slips while extracting sampling tube from the ground.
    US$169.22

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *
 
Back to Top

Categories

Links

Help

Contact Us

  • Map & Contact Us
  • 641-792-8285
  • 641-792-1361

Testimonials

After 25 years of guessing, I decided to get soil samples of my landscape beds tested. I bought...

Bob Reynolds

Submit a Testimonial More...

Copyright © 2007-2025 JMC Soil Samplers