641-792-8285 Contact Us
Print

PN215 Bosch RH1255VC Rotary Hammer & Case w/Adapter for ESP

PN215 Bosch RH1255VC Rotary Hammer & Case w/Adapter for ESP

Share this Product

Details

Weight
47.00 lbs
Our price
US$1923.82

Options

Carbide Bit
Quantity

Product Description

PN215 Bosch RH1255VC Rotary Hammer & Case w/Adapter for ESP

  • Replaces the ESP's manual sliding drop hammer.
  • Substantially reduces operator fatigue when sampling hard packed clay or frozen soils.
  • Drills through concrete (requires carbide bit option). Perfect for gaining access to samples under concrete pads!
  • Runs on standard AC voltage from a power outlet of 1800 watt generator.
  • Slips easily onto sampling tubes or extensions with the included proprietary adapter.
 Bosch RH1255VC Rotary Hammer with Adapter.

Hammer Features

  • SDS-max® bit system tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
  • Dual mode selector 2 modes of operation, rotary hammer and hammer only mode
  • Variable-speed dial for accurate bit starting and controlled chipping applications
  • Constant ResponseTM Circuitry Provides soft-start, maintains constant speed under load, provides overload protection
  • Service MinderTM light indicates when preventative maintenance is required
  • Vario-Lock TM positioning rotates and locks chisel into 12 different positions to optimize working angle
  • Padded rear handle absorbs shock for operator comfort
  • Integral clutch helps minimize torque reaction
  • 360° Auxiliary handle provides a wide range of movement along with operator comfort
  • Double insulated, UL listed, complies to OSHA
  • Includes:Auxiliary Handle & Carrying Case

Hammer Specifications:

  • Amperage: 15.0 Amps
  • Impact Energy (ft. lbs.): 14.1 ft. lbs.
  • No Load RPM: 100-220
  • No Load BPM:1,000-2,150
  • Max. Hole Diameter in Concrete: 2 inches
  • Max. Hole Diameter in Concrete-Core Bit: 6 inches
  • Max. Hole Diameter in Concrete-Thru Hole Bit: 3-1/8inches
  • Max. Hole Diameter in Steel-Twist Drill Bit: 2 inches
  • Max. Hole Dia. - Core Bit: 6 inches
  • Length: 23.5 inches
  • Rating: 120 volts
  • Weight without bit: 26.2 lbs.

  • Related

  • Recommended

  • Reviews

  • Send
  • PN150 JMC Environmentalist's Sub-Soil Probe

    PN150 JMC Environmentalist's Sub-Soil Probe
    The ESP pulls a 3 (or 4) foot long by 0.8 inch diameter sample in one plunge. It captures every sample in a plastic (or stainless steel) liner and can sample to 3 (or 4) feet (30 feet with extensions). Sampling tube is driven by a 12.5 pound drop-hammer (or electric hammer) and retrieved with a foot-operated jack.
    US$3296.78
  • PN004 JMC 26 inch Rod Extension

    PN004 JMC 26 inch Rod Extension

    Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes.

    Attention: Due to supply chain problems, JMC 26" Rod Extensions will be out of stock until September 2022!

    US$70.97
  • PN006 JMC 12 inch Wet Sampling Tube

    PN006 JMC 12 inch Wet Sampling Tube
    Work best in soft, moist soils. Sample core measures 9 inches long by 0.688 inches diameter.
    US$101.71
  • PN007 JMC 12 inch Dry Sampling Tube

    PN007 JMC 12 inch Dry Sampling Tube
    Works well in hard, dry soils. Sample core measures 9 inches long by 0.75 inches diameter.
    US$101.71
  • PN072 JMC 2 inch Professional General Purpose Auger

    PN072 JMC 2 inch Professional General Purpose Auger
    Good for most soils between dry sand and clay. Fits all threaded connection JMC Professional Auger components.
    US$337.89
  • PN017 Dead Blow Mallet

    PN017 Dead Blow Mallet
    Soft-faced mallet for penetrating hard ground with a JMC T-Handle or JMC Driveable Auger Handgrip.
    US$77.10
  • PN235- 36 inch spacer for ESP Tubes

    PN235- 36 inch spacer for ESP Tubes

    This reusable spacer allows you to fit an 12 inch liner into a 48 inch ESP Sampling tube.

    Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liner inside your sampling tube.

    US$47.71
  • PN043 Footpedal for JMC Backsaver Handles

    PN043 Footpedal for JMC Backsaver Handles

    Replacement footpedal for JMC Backsaver and Backsaver N-3 Handles.
    (Will NOT fit the JMC Backsaver N-2 Handle.)

    US$84.96
  • PN162 Guide Rod for ESP and ESP Plus

    PN162 Guide Rod for ESP and ESP Plus

    Threaded Guide Rod fits manual sliding hammer for both the JMC Environmentalist's Sub-Soil Probe (0.8 inch diameter sampler) and the JMC Environmentalist's Sub-Soil Probe Plus (1.2 inch diameter sampler).

    US$97.71
  • PN249 Bolt & Nut, ESP & ESP Plus Footpedal Release

    PN249 Bolt & Nut, ESP & ESP Plus Footpedal Release

    Bolt & Nut, ESP & ESP Plus Footpedal Release
    US$1.91

Product Rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.

Login to post a review

Send to Friend

: *
: *
: *
 
Back to Top

Categories

Recently Viewed

PN111 JMC Driveable Auger Handgrip (threaded connection)
PN111 JMC Driveable Auger Handgrip (threaded connection)
US$125.46
PN247 Fulcrum ESP and ESP Plus
PN247 Fulcrum ESP and ESP Plus
US$91.72

Links

Help

Contact Us

  • Map & Contact Us
  • 641-792-8285
  • 641-792-1361

Testimonials

After 25 years of guessing, I decided to get soil samples of my landscape beds tested. I bought...

Bob Reynolds

Submit a Testimonial More...

Copyright © 2007-2025 JMC Soil Samplers