PN057 JMC 18 inch Zero Contamination Sampling Tube

• 

  PN058 Set of 15, PETG 18 inch Liners w/ Caps

  Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.

  US$42.55
• 

  PN059 18 inch Stainless Steel Liner (0.8 sample diameter) with 2 Vinyl Caps

  Stainless steel liner 18" long. Although made for the JMC 18" Zero Contamination Tube, these liners will also fit the JMC Environmentalist's Sub-Soil Probe when used with Spacers.

  US$36.19
• 

  PN238 - 6 inch spacer for ESP and Zero Contamination Tubes

  This reusable spacer allows you to fit a 12 inch liner into an 18 inch Zero Contamination Tube. It would also fill the empty space in a 36 inch ESP Sampling containing one 12 inch and one 18 inch liner. Remember the spacer sits on TOP of the PETG Copolyester or Stainless Steel liners inside your sampling tube.

  US$27.95
• 

  PN231 - 12 inch spacer for ESP and Zero Contamination Tubes

  This reusable spacer allows you to fit two 12 inch liners into a 36 inch ESP Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester or stainless steel liners inside your sampling tube.

  US$29.93
• 

  PN016 JMC T-Handle

  Handgrip withstands pounding from a soft-faced mallet for penetrating hard ground. Fits all JMC Rod Extensions and Sampling Tubes. (Sampling Tubes sold separately.)

  US$100.03

• 

  PN004 JMC 26 inch Rod Extension

  Threads together in any combination with our 13 and 26 inch Rod Extensions (The picture shows both). Compatible with Backsaver, "T", and Conventional Handles. Also fits most JMC Sampling Tubes. Attention: Due to supply chain problems, JMC 26" Rod Extensions will be out of stock until September 2022!

  US$70.97
• 

  PN061 JMC Quick-Connect Driveable Auger Handgrip

  Compatible with all JMC Quick Connect Augers and Extensions. Can be struck with a mallet.

  US$167.13
• 

  PN058 Set of 15, PETG 18 inch Liners w/ Caps

  Replacement liners for JMC 18 inch Zero Contamination Sampling Tubes available at lower prices when purchased in larger quantities. Click on details for more information.

  US$42.55
• 

  PN016 JMC T-Handle

  Handgrip withstands pounding from a soft-faced mallet for penetrating hard ground. Fits all JMC Rod Extensions and Sampling Tubes. (Sampling Tubes sold separately.)

  US$100.03
• 

  PN139 JMC 42 inch Dakota Probe

  Pulls a 42 inch sample. Self-sharpening cutting tip Nickel-plated, DOM high strength steel.

  US$272.87
• 

  PN138 JMC 5 Foot Tile Probe

  For determining the location of buried tile drains, pipes, storage drums, rocks and clay barriers Easy ground penetration and retraction Nickle-plated steel construction No moving parts

  US$70.66
• 

  PN184 Core Guide for ESP Sampling Tube

  Replacement part. Sandwiched between lower end of sampling tube and cutting tip. Directs flow of soil into the liner. Without it, clay samples have a tendency to crumple the plastic liners.

  US$33.49
• 

  PN463 - 36 inch spacer for ESP Plus Tubes

  This reusable spacer allows you to fit one 12 inch liner into a 48 inch ESP Plus Sampling tube. Remember the spacer sits on TOP of the PETG Copolyester liner inside your sampling tube.

  US$49.36
• 

  PN113 Standard Case for Backsaver, Backsaver N2 Handle, or Auger Equipment

  Fits the Backsaver and Backsaver N-2 handles as well as rod extensions and sampling tubes. Also holds augers with 34 inch extensions.

  US$207.63

Login to post a review